Skip to content
viewneo Docs
CtrlK

Installation

Setup

Section titled “Setup”

Connect the Hardware

Section titled “Connect the Hardware”
  1. Screw the WiFi antenna onto the antenna connector of the SignageBox
  2. Connect the SignageBox to your screen using an HDMI cable
  3. Plug in the power adapter — the SignageBox starts automatically
Section titled “Link the Player to Your viewneo Account”

After startup, the SignageBox displays a registration code on the screen.

  1. Log in at www.viewneo.com/login
  2. Navigate to Devices
  3. Click Add Device
  4. Enter the displayed registration code
  5. Click Save

Settings

Section titled “Settings”

To open the device settings, connect a USB mouse and click the screen multiple times until a lock icon appears in the upper-right corner. Click the lock icon to access the player menu.

WiFi

Section titled “WiFi”
  1. Open the player menu and switch to the System tab
  2. Click Settings
  3. Select WLAN
  4. Enable WiFi and select your network from the list
  5. Enter the password and confirm with Connect

Ethernet

Section titled “Ethernet”

When a network cable is connected, the Ethernet connection is established automatically. For static IP addresses:

  1. Open the player menu and switch to the System tab
  2. Click Settings
  3. Select More and then Ethernet
  4. Change the IP mode from DHCP to Static
  5. Enter the IP address, subnet mask, gateway, and DNS server
  6. Confirm with Connect

Change Language

Section titled “Change Language”
  1. Open the player menu and switch to the System tab
  2. Click Settings
  3. Scroll to Language & Input
  4. Select Language
  5. Select the desired language from the list

Resolution

Section titled “Resolution”
  1. Open the player menu and switch to the System tab
  2. Click Settings
  3. Select Display
  4. Select HDMI Mode
  5. Select the desired resolution and confirm with Keep