The Zigbee wireless socket is an add-on device for the viewneo Butler. It can be used to turn any electrical device on or off when content on a monitor changes.
|Operating voltage version EU||100-240V, 50Hz/60 Hz|
|Radio network||Zigbee HA 1.2|
|Power consumption||< 0,5 Watt|
|Maximum switching capacity||3000 Watt|
To pair the device with a viewneo butler, it must be in the delivery state. If the device was previously paired with another butler, it must first be set back to the delivery state.
The following steps reset the viewneo Plug to its factory default settings.
Attention: If the device does not blink after you press and hold the button for 5 seconds, then it is already in the reset state and can be paired with a viewneo butler.